Multi-Instrument ALS/GC-LC/MS Automation
EnviroLink features powerful interface electronics and software designed to control the
operation of most popular mass spectrometers, allowing
you to completely replace your existing data system while protecting your instrument
investment. EnviroLink instrument control and acquisition is uniform across all
instruments, allowing operators to move easily from a Finnigan INCOS50 to a HP 5970 MSD
without additional training. Standard automation and control features include :
 Simplified automatic and manual
instrument tuning-
- EnviroLink provides access to all ion source, analyzer and detector parameters directly
from the PC. To speed setup and ensure reproducibility, OMNITUNE software automatically
tunes your mass spectrometer to user-specified BFB or DFTPP targets. Instrument parameters
may also be adjusted interactively to meet your own set of optimal tuning conditions.
-
- High dynamic range and scanning
speed
-
- Extended dynamic range (1:6553500) and scanning speed (1500 amu/sec) on Finnigan (INCOS
50, OWA, 4500, ...) and Extrel (ELQ400) instruments offers improved sensitivity in both
scanning and single ion monitoring modes of acquisition. These features help to minimize
the number of sample dilutions and re-runs.
-
- Automates up to four GC/MS
simultaneously
-
- EnviroLink is the first commercially available data system available that
automates up to four GC/MS instruments, all from a single PC. Mix and match makes,
models and applications (VOA, SEMIVOA, Air Toxics, ...). Full multitasking allows simultaneous
data acquisition, processing and report generation from all four instruments.
-
- Method development integrates all
instrument parameters
-
- EnviroLink's easy-to-use tabular and interactive parameter entry tables greatly simplify
acquisition method development. All information regarding instrument setup (ALS,GC,MS) is
saved in a single acquisition method file. In compliance with Good Automated Laboratory
Practices (GALP), this information is also stored with each data file.
-
- Sequencing provides total
automation
-
- Standard sequencing software streamlines unattended operations on large sample groups.
Control sequencing spreadsheets allow different sample sets to be automated using
different methods and processing macros. Time critical injections may be entered on
demand, with return to programmed sequence upon completion. Inherent multitasking allows
data collection and processing to occur simultaneously, with no degradation in system
performance.
|
Features List Recent Enhancements
Environmental Processing and Report Generation
EPA CLP and Custom Reporting
Networking
HP ChemServer / Thruput Target Integration |
